Extract RAR Files Online
Extract RAR files online: open one RAR4 or RAR5 archive up to 50 MB locally, then download its files. Passwords are supported when file names are readable; split archives are not supported.
How to use
- Choose a .rar archive: Drop a .rar file onto the box or click to choose one. One archive at a time, up to 50 MB; to swap it for another, press ✕ on the file row first.
- Click Extract RAR: The first run fetches the extraction engine — a 60 KB worker and a 0.96 MiB WebAssembly file — so the progress bar waits at 0% for a moment; after that it counts the entries as they come out. Cancel requests cancellation. During engine loading or archive setup, the tool may need to finish the current step before reporting cancellation; no partial result is returned. If the archive turns out to be encrypted, a password field appears above the button — type the password and press the same button again.
- Preview and save the files: Every file is listed with its full path inside the archive and its extracted size. Use the numbered buttons to look at one, then Download it — or Download all to save them one after another.
How to extract RAR files online without uploading
Extract one RAR4 or RAR5 archive up to 50 MB locally in your browser. Download the extracted files individually; split volumes and archives with encrypted file names are not supported.
Nothing is uploaded. The page reads the .rar you picked straight from your disk into memory, and the files that come out, the previews and the download links are all copies held in your browser's own memory — so an archive of payslips, client work or ID scans never has to be handed to a web service.
The format is checked on the bytes rather than the file name — the signature Rar! and the byte after it, 00 for rar4 and 01 00 for rar5, are read before anything is downloaded, and entry names are checked for paths that point outside the extraction folder — so a .zip someone renamed to .rar is reported as damaged straight away.
Extraction runs locally using libarchive WebAssembly. The first run downloads a worker of about 60 KB and a 0.96 MiB decoder from Gingertool; your archive is not uploaded.
Encrypted archives, and the ones that can't be opened here
A password-protected archive is not treated as a failure. Once the archive is open, the tool asks libarchive whether any entry is encrypted; if one is and no password has been given yet, the message reads "This archive is encrypted. Enter the extraction password to open it." and a password field appears above the button. Type the password and press Extract RAR again — pressing Enter in the field does the same thing. The bytes that were already read are reused, so the file is not read from disk a second time. If the password is wrong, the reply is "That password isn't correct. Please try again." and you can keep trying; the tool has no cracking or brute-force step of any kind.
Archives with encrypted headers are a different case and cannot be opened here. When the person who packed the archive chose to encrypt the file names as well as the contents, the list itself is unreadable until the password is supplied to the archive reader, and the attempt fails while the archive is still being opened — so you get the damaged or the encrypted message, or the note that no files were found, and never a file list. Open that archive on a computer with WinRAR or 7-Zip, type the password there, and work with the unpacked files.
Split archives are recognised by name and refused on purpose. Both the current style, name.part1.rar, and the older style, name.r00 through name.r99, are matched — the old pattern needs two digits, so a file called report.r1 is not mistaken for a volume — and the reply names the problem instead of handing back half an archive. The reason is simple: a browser receives only the single file you picked and cannot reach across to the other volumes, so there is nothing to join. Collect every part in one folder and extract the set with desktop software.
Everything else that goes wrong gets its own wording rather than a generic error: a truncated download or a file that was never a RAR is called damaged, an archive stopped by the content ceilings says it was blocked to protect your device, a path pointing outside the extraction folder says so, and a run you stopped yourself simply reports that it was cancelled.
What happens to folders and file names after extraction?
File contents come back byte for byte. Extraction is restoration, not conversion: there is no re-encoding step and nothing is packed a second time, so a photo, a spreadsheet or an installer is bit-identical to what went into the archive. The original .rar is only ever read — it is not rewritten, repaired or repacked, and it stays exactly as it was on your device.
The list shows each file's full path inside the archive, such as docs/notes.md, next to its extracted size, so the original folder structure stays visible at a glance. Download names are a different matter, because a browser can only write single files to your downloads and will not rebuild the folders. Folder separators become underscores. Different archive paths can still produce the same download name, so check the saved files and rename duplicates when needed.
Some accented names come back altered, for example niño.txt or báo-cáo.txt showing a Chinese character in place of the accented letter. The cause is a name-recovery step for old rar4 archives that stored names in the Chinese code page (GBK): it misreads a name made up only of Latin-1 characters when an accented letter is followed immediately by another letter, in the list and in the download name alike. An accented letter followed by a dot, a hyphen, a space or a digit is left alone, and so is any name containing a character outside Latin-1, which covers Vietnamese letters such as ệ, ơ and ư as well as Chinese, Japanese and Korean names; names stored in other code pages, such as Windows-1252 or Windows-1258, still read wrongly. The contents are unaffected, so rename the file after saving — or extract that archive with WinRAR or 7-Zip if the names have to survive.
Folders themselves do not survive. Only file entries exist in the result — directories live on in the paths, which is why the list has no folder rows — and an empty folder has no file to carry it, so it cannot come out at all. File metadata is gone too: each entry is a name and its bytes, so modification times, creation dates and permission bits are not kept, and the files you save carry the time you saved them.
A few RAR-specific extras are left behind as well. Archive comments, recovery records and the details of solid compression are features of the container, not of the files, so they do not appear in the result and are not written anywhere else. And nothing is stored: the archive and the files taken out of it live only in the tab's memory, with no cookie and no local storage, so a refresh or a closed tab clears them — files you saved yourself, of course, stay on your device.
Limits, and when another tool is the right one
Archive: 50 MB Files: 10,000 Single extracted file: 256 MB Total extracted size: 512 MB
One archive at a time, up to 50 MB, and only .rar. A bigger file is stopped at the drop box with a size notice, other file types are filtered out before anything happens, and dropping several files at once is refused as a batch — the page names how many were dropped and adds none of them, so drop one file or click to pick one. Once an archive is chosen the drop box is gone until you clear it with ✕ on the file row. 7Z, TAR and GZ have no tool on this site yet, whatever a file name claims.
The three content ceilings are checked before a single byte is expanded. Listing the archive gives the extracted size each entry declares, and the whole archive is refused if it crosses one of them — more than 10,000 entries, a single file over 256 MB extracted, or more than 512 MB extracted in total — or if an entry name points outside the extraction folder: a path starting with / or a drive letter, a UNC path, or any name with a segment equal to exactly .. (so an ordinary report..txt is fine). There is no compression-ratio test here, unlike the ZIP side of the site, because a RAR listing reports no per-entry packed size; the three ceilings are what stops an archive that claims to expand into more than your device can hold.
The whole archive is extracted in one pass. There is no way to list the contents first and take only the two entries you want, which also sets the memory bill: peak usage is roughly the size of the archive plus everything extracted from it. The decoding runs in a worker, so the page itself keeps responding, but the memory pressure belongs to the whole tab, and an archive near the 50 MB limit can be slow or fail outright on an older phone.
Cancel interrupts whatever the run is waiting on. During file listing or extraction it stops the pending operation and closes the archive reader, so an entry halfway through being read does not have to finish first. Engine loading and archive setup are the exception: those may need to complete their current step before the cancellation is reported. No partial result is returned either way, and a cancelled run never turns back into a successful one.
The progress figure counts entries, not bytes: it is the number of files already extracted divided by the total number in the archive. An archive holding one large file and a pile of small ones therefore sits on the same percentage for a long time and then races to the end. That is normal and not a sign that anything has stalled.
This tool will never produce a .rar file. The RAR decoder inside libarchive comes from unRAR, whose licence permits extraction only, so writing a rar is not something the site can offer at any point in the future. When you need to bundle files up again — including the ones you just extracted — the format to use is ZIP, which opens on any system.
If the archive you have is a .zip rather than a .rar, Unzip Files does the same job.
How to open a RAR file on iPhone or Android
The usual phone problem is that .rar is not ZIP: the Files app on an iPhone, and most Android file managers, will show you the archive and then refuse to open it, which is why the normal advice is to install an archiver app. Here you can tap the drop box, choose the archive from Files or Files by Google, and extract it in the browser instead. When you save a file, the browser is asked to hand it to the system share sheet where that is supported, so you can store it in Files or send it on; where it is not supported, the file downloads the ordinary way. If you dismiss the share sheet, nothing is saved — press Download again. Download all saves the files one after another, which on a phone can mean one prompt per file, so for a large archive it is usually quicker to pick the two or three entries you actually need.
Images and PDFs have inline previews. MP4 videos are played when the browser supports their encoding; unsupported videos and other formats remain available to download. The numbered buttons follow the same order as the list above them, so entry 7 in the list is button 7.
To bundle the files you just extracted and pass them on as a .zip, use Create ZIP.
Frequently asked questions
- Is my RAR file uploaded to a server?
- No. The archive is read from your disk and decoded inside the browser tab, and the previews and download links point at copies in your browser's memory. The one thing that does come over the network is the extraction engine — a 60 KB worker and a 0.96 MiB WebAssembly file, served from this site with a 30-day cache policy — and that happens the first time you press the button, not when the page opens.
- Can it open a password-protected RAR file?
- Yes, if you know the password and the archive's file names are not encrypted. When the archive's file list can be read, the tool detects the encryption, shows a password field above the button, and extracts the files once you supply the password; a wrong password says so and you can try again. The exception is an archive whose headers are encrypted too, because then even the file list is unreadable — those need WinRAR or 7-Zip on a computer.
- Does it support RAR5 as well as older RAR files?
- Yes, both. The archive signature is read first and the byte after it identifies the version: 00 means rar4 and 01 00 means rar5. Because the check looks at the bytes rather than the file extension, a file that is not really a RAR at all is reported as damaged before the extraction engine is even downloaded.
- Why won't it open my part1.rar file?
- Because that file is one volume of a split archive, and a browser only receives the single file you picked — there is no way to reach the other volumes and join them. Both name.part1.rar and the older name.r00 style are recognised and refused with a clear message instead of a half-extracted result. Put all the parts in one folder and extract them with WinRAR or 7-Zip.
- What is the largest RAR I can extract here?
- Up to 50 MB per archive, one archive at a time. The contents are capped as well: 10,000 entries, 256 MB for any single extracted file, and 512 MB extracted in total. An archive that declares more than any of those is refused before extraction starts, rather than being left to fill your device's memory.
- Why don't the folders appear when I download the files?
- A browser can only save single files, so the folders are not rebuilt: docs/notes.md arrives as docs_notes.md. Folder separators become underscores. Different archive paths can still produce the same download name, so check the saved files and rename duplicates when needed. The full paths stay in the list on the page, so you can recreate the structure yourself.
- Can I compress files into a RAR file here?
- No, and that will not change. The RAR decoder this tool uses comes from unRAR, whose licence allows extraction only, so no rar file is ever written. To bundle files — the extracted ones included — use Create ZIP and share the .zip, which opens on Windows, macOS, Linux, Android and iOS without extra software.
- How do I open a RAR file on an iPhone without WinRAR?
- Choose the RAR in your iPhone browser, extract it here, then save each file. Unlike a ZIP, a .rar cannot be opened by the Files app itself, which is why this page is useful on iOS: tap the drop box, pick the archive from Files or iCloud Drive, press Extract RAR, and save what you need — the system share sheet opens where the browser supports it, and otherwise the file downloads normally. Keep archives modest on a phone, because the archive and its contents are held in memory.