Body Fat Calculator

Estimate your body fat percentage with a tape measure (US Navy formula) or from BMI and age. Everything is worked out in your browser — no measurements leave the page.

cm
kg
cm
cm

Measure the neck at its narrowest point, just below the Adam's apple. Men measure the waist at navel level, women at its narrowest point; women also need the hips at their widest. Don't hold your stomach in — keep the tape snug against the skin but not tight.

Your body fat percentage (US Navy tape measure method)
16.9%Fitness
Fat mass11.9 kg
Lean body mass (fat-free mass)58.1 kg

Based on the US Navy tape measure method, your body fat is about 16.9%, which sits in the “Fitness” band for men. That works out to roughly 11.9 kg of fat and 58.1 kg of lean mass. Body fat percentage is an estimate with a margin of about ±3%–4%, so use it as a reference rather than a measurement.

See the ACE body fat chart for men
BandBody fat range
Below essential fat< 2%
Essential fat2% – 6%
Athletes6% – 14%
Fitness14% – 18%
Acceptable (average)18% – 25%
High (obese range)≥ 25%

How to use

  1. Choose your sex and method: Sex changes both the formula and the ACE reference bands. Leave Method on "Tape measure method (recommended, more accurate)" if you have a tape to hand, or switch to "BMI estimate (rougher)" if you only know your height, weight and age.
  2. Enter your height and measurements in cm: The tape method asks for Height, Neck and Waist, plus Hips when Sex is Female. The BMI estimate asks for Height, Weight and Age instead. Every field is centimetres or kilograms.
  3. Add your weight to see fat and lean mass: Weight is optional on the tape method — fill it in and the page also shows Fat mass and Lean body mass (fat-free mass) in kg.
  4. Read the percentage and its band: There is no calculate button: the result updates as you type. Open "See the ACE body fat chart for men" or "for women" to see where your figure sits among the six bands.

How this body fat calculator works

Men (tape): BF% = 495 / (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450
Women (tape): BF% = 495 / (1.29579 − 0.35004 × log10(waist + hips − neck) + 0.22100 × log10(height)) − 450
BMI estimate: BF% = 1.20 × BMI + 0.23 × age − 10.8 × sex − 5.4   (sex: 1 = male, 0 = female)

This body fat calculator estimates adult body fat using the US Navy tape method or a BMI-based formula. Enter measurements in cm and weight in kg; a man measuring 175 cm tall, 38 cm at the neck and 85 cm at the waist gets 16.9% with the tape method. The tape method is the US Navy circumference formula published by Hodgdon and Beckett, and it asks for height, neck and waist — plus hips for women — with weight left optional. The BMI estimate is the Deurenberg adult formula and asks for height, weight and age instead, with no tape measure involved. Either way the result appears to one decimal place together with its band, and the whole calculation happens in your browser.

That 16.9% lands in the Fitness band. Add a weight of 70 kg and the page also reports 11.9 kg of fat mass and 58.1 kg of lean body mass (fat-free mass). Leave Weight blank and you still get 16.9% — only the two kilogram figures disappear.

The same person run through the BMI estimate (175 cm, 70 kg, age 30) gives 18.1%, about 1.2 percentage points higher than the tape result. The two can disagree like that because they were fitted to different inputs, and the BMI version has nothing in it that could tell muscle from fat. Switch methods and the inputs on screen change with them — the tape fields disappear, Age appears, and Weight becomes required rather than optional.

Units are metric only, cm and kg, with no inches or pounds anywhere in the form. Nothing is uploaded, saved or logged: your figures live in the page while it is open and are gone when you close or refresh it, so there is also no history to compare two measurements over time.

How to measure your neck, waist and hips

Measure the neck at its narrowest point, just below the Adam's apple, and keep the tape level. Men measure the waist at navel level; women measure it at the narrowest point of the waist, and also need the hips at their widest. Keep the tape snug against the skin without pulling it tight, breathe normally and don't hold your stomach in — the page repeats this in a hint under the fields.

Measurement care matters more than the formula here, because the waist term carries most of the weight. Taking the same 175 cm man and reading his waist as 90 cm instead of 85 cm moves the result from 16.9% to 20.7% — 3.8 percentage points from 5 cm of tape. Reading his neck as 40 cm instead of 38 cm pushes the figure the other way, from 16.9% down to 15.4%. Larger neck, lower body fat: the formula works off the gap between waist and neck.

Two practical consequences. First, measure at the same time of day, with the same landmarks, if you want to compare a figure in a month's time — a difference of a percentage point or two can be measurement noise rather than a change in your body. Second, the tape method needs a waist bigger than your neck (and, for women, waist plus hips bigger than the neck), because the formula takes the logarithm of that difference. Mistyping 40 cm for both neck and waist is rejected rather than calculated.

What is a healthy body fat percentage?

Men   — below essential < 2% · essential 2–6% · athletes 6–14% · fitness 14–18% · acceptable 18–25% · high ≥ 25%
Women — below essential < 10% · essential 10–14% · athletes 14–21% · fitness 21–25% · acceptable 25–32% · high ≥ 32%

The bands on this page come from the American Council on Exercise (ACE) body fat categories, one set for men and one for women. They are reference norms for adults rather than a diagnosis, and they do not shift by age or country — the calculator uses the same two sets of thresholds for everyone. Open the chart under the result to see all six bands with your own figure highlighted.

Women's category thresholds differ from men's: essential fat starts at 10% versus 2%, Fitness at 21% versus 14%, and Acceptable at 25% versus 18%. They sit higher because essential fat — the fat in nerves, bone marrow, organs and cell membranes, and the fat tied to reproductive function — is higher in women. In practice that means the same number means different things: 26.8% is Acceptable for a woman (the figure a 175 cm woman with a 38 cm neck, 85 cm waist and 95 cm hips gets) while 25% already starts the High band for a man.

The lowest band, "Below essential fat", is not part of the published ACE table; it covers anything under 2% for men or 10% for women so that physiologically implausible-but-possible results aren't labelled as normal essential fat. A 185 cm man entered with a 37 cm neck and a 68 cm waist returns 0.7%, which lands there, and the page adds a line about the health risks of very low body fat and suggests confirming it with a professional test and a doctor.

Each band is a half-open range — 14% to 18% means "14 up to but not including 18" — and the band is picked from the rounded percentage you see on screen, so the highlighted row always matches the number above it.

Planning a cut or a bulk off the back of that number? TDEE Calculator turns your height, weight, age and activity level into daily calories.

What this calculator can't tell you

It is an estimate, not a measurement. Both formulas are population regressions, and ±3%–4% is the error range usually quoted for the Navy circumference equations — a statistic about the formula, not something measured here. A 2022 Frontiers in Physiology survey of US Marines found the circumference approach underestimated body fat in men and overestimated it in women, with the biggest overestimates among lean women. Treat the output as a rough bracket you can track, and use DEXA, hydrostatic weighing or a clinical body composition test when you need a real number.

Some bodies fall further outside the formula's assumptions than others. Very muscular lifters and strength athletes, people who are pregnant or breastfeeding, anyone with significant swelling or marked muscle loss, and unusual body proportions all stretch a formula that was fitted to average adult shapes. The BMI estimate is weaker still, since height, weight and age cannot distinguish 70 kg of mostly muscle from 70 kg of mostly fat — that is why the page labels it the rougher option.

The calculator also refuses rather than guesses. Results have to land between 0% and 75% body fat, so wildly inconsistent measurements (a 250 cm height with a 49 cm neck and 50 cm waist, for instance) produce an input error instead of a negative percentage or a negative lean mass. The BMI estimate accepts ages 18 to 120 only: enter 17 and it says the adult Deurenberg formula doesn't apply and points you back to the tape method.

Finally, nothing here is medical advice, and the page does no more than classify a number. It won't tell you a target weight for a goal body fat, won't suggest calories, won't take skinfold-caliper readings, can't handle several people at once, and has no export, saved history or shareable result link. Fat mass and lean mass are each rounded to one decimal place independently, so the two can add up to 0.1 kg more or less than the weight you typed.

Frequently asked questions

How do I measure body fat with a tape measure?
Measure your neck at its narrowest point just below the Adam's apple, and your waist at navel level if you are male or at its narrowest point if you are female; women also measure the hips at their widest. Keep the tape level and snug but not tight, stand relaxed, then enter the figures in cm along with your height.
How accurate is the US Navy body fat formula?
The error range usually quoted for the Navy circumference equations is about ±3%–4% against laboratory methods. It is a population formula, so individual results can sit further out — a 2022 study of US Marines found it ran low for men and high for lean women. It is useful for tracking a trend, not for a precise number.
What is a healthy body fat percentage?
On the ACE bands used here, 14–18% is the Fitness range for men and 21–25% for women, with 18–25% and 25–32% counted as Acceptable. Men reach the High band at 25% and women at 32%. These are adult reference norms rather than a medical verdict, and they are the same at every age in this chart.
Should I use the tape measure method or the BMI estimate?
Use the tape measure method whenever you have a tape: it reflects where your body actually carries size. The BMI estimate is a fallback for when you only know height, weight and age, and because it cannot separate muscle from fat it is a poor fit for muscular builds. On the same 175 cm, 70 kg, 30-year-old man the two differ by 1.2 points (16.9% vs 18.1%).
What is lean body mass?
Lean body mass, also called fat-free mass, is your weight minus your fat mass: everything else, including muscle, bone, organs and water. Enter a weight and the calculator splits it in two — 70 kg at 16.9% body fat gives 11.9 kg of fat and 58.1 kg of lean mass. It is not a muscle-mass figure, since bone and water are in there too.
Why don't fat mass and lean mass add up to my exact weight?
Because each one is rounded separately to one decimal place, the two can total 0.1 kg more or less than the weight you entered. Internally both are derived from the unrounded body fat percentage times your weight, so the split itself is exact — only the display is rounded.
Can teenagers use this body fat calculator?
Not with the BMI estimate: it is built on the Deurenberg adult formula and the page blocks ages under 18, suggesting the tape method or a professional instead. The tape method will return a number for a teenager, but it was also fitted to adults, so treat the result for anyone still growing as unreliable and ask a doctor or sports professional.
Can I enter inches and pounds?
No — the form is metric only, with cm on the height and circumference fields and kg on weight. Convert before you type: multiply inches by 2.54 for cm, and pounds by 0.4536 for kg. A 70 in height is 177.8 cm and 165 lb is 74.8 kg.