Body Surface Area Calculator
Work out your body surface area in m² from height and weight, and see all five classic formulas at once. Everything is calculated in your browser — nothing is uploaded.
Body surface area (BSA) applies from newborns to adults. Height and weight alone decide the result, so measure with your shoes off and weigh yourself in the morning before eating. All five formulas are listed below for comparison.
On the Mosteller formula your body surface area is about 1.75 m², which is 101% of the 1.73 m² “standard body surface area” used in medicine. BSA is used to scale drug doses given in mg/m², to work out cardiac index (CI = cardiac output ÷ BSA) and to index eGFR to 1.73 m². The formulas give slightly different answers; Mosteller and Du Bois are the usual clinical choices, and you can compare all five in the table below.
Compare body surface area across 5 formulas
| Formula | Body surface area (m²) |
|---|---|
| Mosteller | 1.75 |
| Du Bois | 1.75 |
| Haycock | 1.75 |
| Gehan & George | 1.76 |
| Fujimoto | 1.71 |
Each of these is an empirical formula fitted to a different sample in a different decade, so adult results usually differ by less than 5%. Mosteller is the simplest and widely used in clinical practice; Du Bois is the classic standard; Haycock and Gehan & George fit pediatric samples more closely; Fujimoto was fitted to a Japanese population.
How to use
- Enter your height in cm: The Height field is centimeters only — there is no feet-and-inches input. Measure with your shoes off; the page starts at 170 cm.
- Enter your weight in kg: The Weight field is kilograms only. Morning, before eating, is the most consistent time to weigh yourself; the page starts at 65 kg.
- Pick the main formula: The Main formula dropdown offers Mosteller (the default), Du Bois, Haycock, Gehan & George and Fujimoto. Your choice sets the headline number.
- Read the result and open the comparison: There is no calculate button — the figure updates as you type. Open "Compare body surface area across 5 formulas" to see what the other four give for the same height and weight.
Body surface area calculator: formula and example
Mosteller (1987) BSA = √(height × weight / 3600) Du Bois & Du Bois (1916) BSA = 0.007184 × weight^0.425 × height^0.725 Haycock (1978) BSA = 0.024265 × weight^0.5378 × height^0.3964 Gehan & George (1970) BSA = 0.0235 × weight^0.51456 × height^0.42246 Fujimoto (1968) BSA = 0.008883 × weight^0.444 × height^0.663 (height in cm, weight in kg, BSA in m²)
This body surface area calculator estimates BSA in m² from height in cm and weight in kg using five formulas. With Mosteller, 170 cm and 65 kg gives 1.75 m², or 101% of the 1.73 m² reference. Results are estimates, not diagnoses.
Body surface area (BSA) is the outside area of a body in square meters, estimated from height and weight by an empirical formula rather than measured on the skin. The form asks for exactly three things — a height in cm, a weight in kg and one of five formulas as the Main formula — and returns the BSA to two decimal places, plus that figure as a percentage of the 1.73 m² reference used in medicine.
There is no calculate button and no sign-up. Change any of the three inputs and the result is recomputed immediately, so you can watch the number move as you adjust a weight. There are no fields for sex, age or ethnicity, because none of the five formulas takes them: the same height and weight always produce the same five numbers.
All five formulas are evaluated on every change, not just the one you selected. Switching the Main formula dropdown therefore changes only the headline figure, the formula name, the percentage of 1.73 m² and which row is highlighted in the comparison table — the table's contents stay the same. The math runs on decimal values internally and is rounded for display only at the end, to two decimal places for BSA and to a whole percent for the comparison.
| Height | Weight | Mosteller BSA | % of 1.73 m² |
|---|---|---|---|
| 180 cm | 80 kg | 2.00 m² | 116% |
| 175 cm | 70 kg | 1.84 m² | 107% |
| 160 cm | 60 kg | 1.63 m² | 94% |
| 150 cm | 45 kg | 1.37 m² | 79% |
| 190 cm | 110 kg | 2.41 m² | 139% |
Worked examples on the default Mosteller formula; 180 cm with 80 kg lands on exactly √4 = 2.00 m². The classic textbook pairing of 170 cm and 70 kg returns 1.81 m² on Du Bois.
Mosteller, Du Bois, Haycock, Gehan & George or Fujimoto — which one?
This calculator will not pick a formula for you. It opens on Mosteller and lists the other four alongside it for comparison, with no recommendation based on your age, sex or build. If a clinic, protocol or paper you are working from names a formula, select that one; if nothing specifies, Mosteller is the usual bedside default because it is the simplest to reproduce — a square root of height times weight over 3600.
The five differ because each is a regression fitted to a different sample in a different decade. Du Bois & Du Bois (1916) is the long-standing classic that later equations are compared against. Haycock, Schwartz & Wisotsky (1978) and Gehan & George (1970) were fitted with pediatric data in the sample and track children more closely. Fujimoto (1968) was fitted to a Japanese population, and in each of the five-formula comparisons below it comes out lowest or joint-lowest. Mosteller (1987) was published as a simplification that stays close to Du Bois for ordinary adult sizes.
How much do they actually disagree? For adult-sized inputs the gap is usually under 5%, and it widens the further you get from the body sizes each formula was fitted to — that is what extrapolating an empirical regression does. Across 150–190 cm and 45–110 kg, the highest and lowest of the five differ by 2.8%–4.7%: at 170 cm / 65 kg the five read 1.75, 1.75, 1.75, 1.76 and 1.71 m² (a 2.9% spread), and at 180 cm / 80 kg they read 2.00, 2.00, 2.01, 2.01 and 1.94 m² (3.6%).
Move away from that middle and the disagreement grows. At 165 cm / 95 kg (BMI about 34.9) the five give 2.09, 2.02, 2.13, 2.12 and 1.98 m² — a 7.6% spread, more than double the spread at the default. A 50 cm, 3.5 kg newborn gives 0.22, 0.21, 0.22, 0.23 and 0.21 m², a 9.5% spread, and at the very bottom of the accepted range, 30 cm and 1 kg, the five differ by 25% and are effectively not comparable. When the choice of formula moves the answer that much, which formula was used matters more than the number itself.
What the “% of standard BSA (1.73 m²)” figure means
The percentage next to your result is simply your BSA divided by 1.73 m², rounded to a whole percent. At 170 cm and 65 kg that is 1.75 / 1.73 ≈ 101%; 160 cm and 60 kg gives 94%, and 190 cm and 110 kg gives 139%. It is a size comparison and nothing more — a way of saying how far above or below the medical reference body your own estimate falls.
1.73 m² is there because kidney function reports use it. Estimated glomerular filtration rate (eGFR) is reported per 1.73 m², an accepted average adult body surface area, so that results are comparable between people of different sizes; the US National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK) describes it as exactly that kind of normalization. The value is fixed in this tool: it does not change with the formula you choose or the language of the page.
That percentage is not an eGFR, and it is not a cardiac index. Both of those need inputs this calculator never asks for — creatinine and age for eGFR, a measured cardiac output for cardiac index (CI = cardiac output ÷ BSA). All this page can do is supply the BSA that such a calculation would be indexed to.
One detail worth knowing if you check the arithmetic by hand: the percentage is computed from the unrounded BSA and only then rounded, rather than from the two-decimal figure on screen. So dividing the displayed 1.75 by 1.73 may land a percent away from the percentage shown. That is deliberate — it stops a rounding step from being applied twice.
Looking at other body measurements as well? Body Fat Calculator estimates body fat percentage and lean mass from a tape measure or from BMI and age.
Limits, and what this calculator will not do
Height has to be between 30 and 250 cm and weight between 1 and 400 kg, and the pair is then checked together: the implied BMI must land between 5 and 90, or the result area shows the input error instead of a number. The single-field ranges are deliberately wide so that newborns through to very large adults all fit, and the combined check is what catches the two classic typos — entering a height in meters (1.75 cm with 70 kg is rejected) and swapping the two boxes (70 cm with 170 kg is rejected). Leave a box empty or type something that is not a positive number and you get a prompt to fill in a valid height and weight, not an error.
Inside those ranges the calculator does not second-guess you. 120 cm with 100 kg is a BMI of roughly 69 and physically implausible, but it is inside the 5–90 window, so the page returns 1.83 m² with no warning attached. The tool makes no judgment about whether a height and weight combination is healthy, realistic or typical — it has no bands, no categories and no BMI output.
It also stops at the area. There is no drug name field, no mg/m² box and no multiplication step, so it cannot produce a chemotherapy dose; it cannot produce an eGFR, a cardiac index, a BMI, a body fat percentage or an ideal weight either. Units are metric only — the Height field is labelled cm and the Weight field kg, with no feet, inches or pounds anywhere, so convert before typing (1 inch = 2.54 cm, 1 lb ≈ 0.4536 kg).
Finally, every figure here is an estimate from a published regression, not a measurement of your skin. Nothing is uploaded, stored in the browser or written into the address bar: there is no history, no account and no shareable results link, so your height and weight exist only in the open page and are gone when you close or refresh it. Check anything that will inform treatment with the clinician or pharmacist who will act on it.
Need a calorie figure from the same height and weight? TDEE Calculator turns them into daily energy needs.
Frequently asked questions
- How do you calculate body surface area?
- Using Mosteller, BSA (m²) = √[(height in cm × weight in kg) / 3600]. For 170 cm and 65 kg that is √(11,050 / 3600) = √3.0694 ≈ 1.75 m². Enter the two figures above and the calculator does it, along with four other published formulas.
- Which BSA formula should I use?
- Use whichever one your protocol, clinic or source specifies — that consistency matters more than the formula itself. With nothing specified, Mosteller is the common default and this page opens on it. Du Bois is the 1916 classic, Haycock and Gehan & George had pediatric data in their samples, and Fujimoto was fitted to a Japanese population.
- How much do the five BSA formulas differ?
- For adult-sized inputs, usually under 5%. Across 150–190 cm and 45–110 kg the five values here span 2.8%–4.7%: at 170 cm / 65 kg they run 1.71 to 1.76 m². The gap widens away from the sizes each regression was fitted to — 7.6% at 165 cm / 95 kg, and 9.5% for a 50 cm, 3.5 kg newborn.
- What is a normal body surface area in m²?
- This calculator does not classify BSA as normal or abnormal; 1.73 m² is its comparison reference, the standard adult value used in medicine. Ordinary adult heights and weights land near it: 160 cm / 60 kg gives 1.63 m² and 180 cm / 80 kg gives 2.00 m². The percentage shown is a size comparison, not a health verdict.
- Can this calculate my chemotherapy dose in mg/m²?
- No. The tool outputs body surface area only — it has no field for a drug or a mg/m² rate and performs no multiplication, so it cannot give a dose or a dose cap. You would multiply the prescribed mg/m² by the BSA, and that calculation belongs with the clinician or pharmacist responsible for the prescription.
- Is the percentage of 1.73 m² my eGFR?
- No — it is your BSA divided by 1.73 and nothing else. eGFR is reported per 1.73 m² of body surface area, which is why the reference appears here, but estimating eGFR needs creatinine and age, which this page never asks for. The same applies to cardiac index, which needs a measured cardiac output.
- Can I enter height in feet and inches, or weight in pounds?
- No. The Height field is cm and the Weight field is kg, with no unit switch on the form. Convert first: multiply inches by 2.54 for cm and pounds by 0.4536 for kg, so 5 ft 9 in is 175.3 cm and 150 lb is 68 kg. Decimals are accepted in both fields.
- Does it work for babies and children?
- Yes — the accepted range goes down to 30 cm and 1 kg, so 140 cm / 35 kg returns 1.17 m² and a 50 cm, 3.5 kg newborn returns 0.22 m². Treat small sizes with more care, though: the five formulas spread 9.5% at that newborn size and 25% at 30 cm / 1 kg, so the formula choice drives the answer.